Rimpact ORIGINAL Tyre Inserts
Contents Per Pack:
- 2x Tyre Inserts
- 2x 44mm
Many size combinations available, scroll down on the drop down menus for more. If you can’t see what you need, email us and we might be able to make you a custom set.
Please Note: This includes a set of valves – There is a ’Replacement’ product option available in the shop that ships without valves for those who are replacing a set of inserts and already own a pair of Rimpact Unblockable Valves. Rimpact must be used in conjunction to our Valve design.
Suitable for rims with an inner diameter of 23mm – 35mm and tyre widths 2.3″ – 2.6″. It is possible to use the insert with narrower or wider tyre but it will increase the difficulty of fitting. Do not purchase if your rims are out side of this spec.
Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare. Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the outside of the insert requiring a slightly higher dosage. It can be injected through Rimpact Valves or poured directly into the tyre.
Weight: approx 95g per insert for 29″, 90g approx for 27.5″ and 85g approx for 26″.
Please follow installation instructions prior to fitting/removing.
Disclaimer: It is not advised to run air pressures outside that of the tyre manufacturers recommendations. Failure to do so may result in injury or the premature failure of the bicycle. Rimpact does not accept any responsibility for misuse of the Rimpact insert or improper installation. Rimpact Inserts are designed to work WITH Rimpact unblockable valves.
Not included: Tyres, Wheelset.